Deep Apple Green Jacquard

A Jacquard fabric which is a good medium weight for Tutu bodices.

Lilac

The Jacquard weave has an all over pattern of swirls edged with a high sheen thread.

This gives the fabric a textured unusual effect without using different colours in the design.

100% Polyester and 155 cm approximately in width.

Made in Japan.

Apple Green, Royal Blue, Aqua, Lilac.

Royal Blue on a separate listing

Smokey Blue

Colours might not show accurately on your monitors so please order a sample if you are unsure of the colour

The post A Jacquard Fabric FJ 1184 Smokey Blue, Aqua, Apple, Lilac appeared first on Valorose Tutus and Textiles.

Showing 2 rows of the Silver on Black trim

Embroidered lightly in metallic Gold or Silver thread on a Black satin.

The satin is on Vilene with an Iron on backing which can be sewn on for security.

48 mm wide with scrolls down the centre and a scallop along the edge.

Can be used for Men’s jackets on the lapels or for sleeve decorations as well as for Tutus.

Caution to be used when ironing-test a sample first always

These ribbons come in 5.48 metre pieces so if you are ordering per metre they might be in 2 pieces

If you want to order 1 piece of 5.48m then add ‘1’ to the box

The post Embroidered Ribbon – CAY11 appeared first on Valorose Tutus and Textiles.

Showing the reverse side of the Jacquard

Good quality Jacquard Brocade fabric which is reversible.

Pale Pink/Ballet Pink

A strongly woven medium weight fabric with the swirl in the high sheen thread.

Pale Ivory Reversible FAO415

Width is approximately 112 cm

Lilac, Pale Pink/Ballet Pink, Pale Ivory (Silk White)

If unsure please order a sample.

Limited quantity in stock.

Made in Japan

The post A Jacquard Reversible Fabric in swirls – FA O415 appeared first on Valorose Tutus and Textiles.

These are soft in feel.

Gold pair detail

Free embroidery–no base mesh.

Measuring approximately 20 cm x 10 cm each piece

FJ2 in an Off White -softer embroidery thread

Also available in Rayon embroidery thread in an off White

The post FJ2 Off White Applique Pairs appeared first on Valorose Tutus and Textiles.

9mm x 22cm (9″) Spiral Boning

Spiral steel cut into lengths and capped with metal end caps.

Standard thickness is 0.75 mm. Sturdier thickness is 0.90 mm.

Common lengths stocked are in 5 mm  and 7 mm widths x 0.75 mm

Some are in the stronger 0.90 mm depth.

Longer bones are better in the heavier weight if more support is needed.

Various sizes in stock. Sizes approximate.

Made in Europe

The post Spiral Steel Boning – Pre cut lengths – 5 mm and 7 mm and 11 mm wide appeared first on Valorose Tutus and Textiles.

5 mm End caps

‘U’ shaped tips to cover the ends of sharp edges of the continuous steel boning

Easy to apply with a touch of general adhesive for metal and a pair of pliers to crimp the ends

Allow to dry before inserting into the bone casing

Sold in packs of 10 or 100

5 mm End caps x 10 –£0.50

5 mm End caps x 100 -£4.00

7 mm End caps x 10 — £0.60

7 mm End caps x 100–  £5.00

11 mm End caps x 10 — £0.70

11 mm End caps x 100 — £6.00

Made in Europe

The post Nickel plated brass end caps-for steel boning appeared first on Valorose Tutus and Textiles.